guttabeta
Product description
Advantages
- high pressure resistance
- highly resistant to cracks
- abrasion resistant
- free of decay
- toxicologically harmless
- no action on drinking water
- impact resistant, elastic
- resistant to chemicals
- impact resistant and fracture resistant
Applikation examples
- Foundation wall protection
- Protection of the foundation wall sealing
- Drainage systems
- inding layers
- Floor screed underlayers
- Component of terrace garden concepts
- Drainage of cellar walls
Maximum safety
The high pressure stability of the guttabeta® star dimpled membranes can be attributed to the special star-shaped geometry of the studs. This design raises the value of the membrane to more than 50% above that of comparable traditional dimpled membranes. The ridges reinforce the studs and are excellent at diverting pressures. This means that the HDPE material achieves a particularly high mechanical resilience. The well-established physical and chemical properties of HDPE are unaffected by this.
In a vertical installation, the high pressure resistance of the guttabeta® star dimpled membranes makes it possible for them to absorb the ground pressure on the insulation at a much better rate. The load-bearing capacity and resilience of the studs increase in a horizontal installation.
- Foundation wall protection when sealed with bitumen coating or waterproofing slurries
- For water-permeable floors
- Terrace gardens
- Bedding layers
- Floor screed underlayers
guttabeta® drain – the high-tensile drainage membrane with filter fleece
guttabeta® drain is a special dimpled membrane with laminated filter fleece for the highest performance. The filter fleece, made of tear-proof and decay-resistant polypropylene, prevents the dimpled structure from being filled with slurry. At the same time the membrane’s drainage channels always stay clear. This results in an efficient dewatering process and a continuously clear air chamber that permits more seepage water to drain than regular dimpled membranes.
- Foundation wall protection when sealed with bitumen coating or waterproofing slurries
- Laminated, decay-resistant filter fleece prevents the membrane channels from being filled with slurry
- Drainage systems for waterproof floors or slopes
- Suitable for perimeter insulations
guttabeta® drain plus –with filter fleece and sliding foil
This dimpled membrane was developed specifically for the sealing of masonry with permanently elastic thick coatings. guttabeta® drain plus consists of three functional layers that are connected to a compact laying unit.
- Foundation wall protection when sealed with thick coatings
- The sliding foil prevents spot pressures and acts as a sliding surface for the dimpled membrane when the fill soil is set or otherwise moved.
- Laminated, decay-resistant filter fleece prevents the membrane channels from being covered with slurry
- Drainage systems for all floors or slopes
Technical Data
Material
Polyethylen (HDPE) High Density
Color
black
Compression restistance
about 400 kN/m² (40 t/m²)
Stud height
about 7 mm
Studs per
1860 piece/m²
Air volume between studs
about 5,0 l/m²
Drainage ability
about 4,6 l/s/m (16600 l/h/m)
Roll sizes in m
1,0 x 20, 1,5 x 20, 2,0 x 20, 2,5 x 20, 3,0 x 20, 4,0 x 20
Temperature reistance
- 40°C up to + 80°C (protect from UV-radiation)
Properties
resistant to chemicals resistant to roots, harmless to drinking water, resistant to mould and bakterial attacks, decay resistant
guttabeta® drain
Material
of membran: Polyethylen (HDPE) High Density
of filter webbing: Polyproylen endless fiber
of filter webbing: Polyproylen endless fiber
Color
of membran: black
of filter webbing: grey
of filter webbing: grey
Compression restistance
about 250 kN/m² (25 t/m²)
Stud height
about 8 mm
Studs per
1860 piece/m²
Air volume between studs
about 5,3 l/m²
Drainage ability
about 4,6 l/s/m (16600 l/h/m)
Pallet units
6 Rolls
Roll sizes in m
2,0 x 20
Temperature reistance
- 40°C til + 80°C (protect from UV-radiation)
Properties
resistant to chemicals resistant to roots, harmless to drinking water, resistant to mould and bakterial attacks, decay resistant
guttabeta® drain plus
Material
of membran: Polyethylen (HDPE) hohe Dichte
of filter webbing: Polypropylen
of slip film: Polyethylen (LDPE)
of filter webbing: Polypropylen
of slip film: Polyethylen (LDPE)
Color
of membran: black
of filter webbing: grey
of slip film: black
of filter webbing: grey
of slip film: black
Compression restistance
about 250 kN/m² (25 t/m²)
Stud height
about 8 mm
Studs per
1860 piece/m²
Air volume between studs
about 5,3 l/m²
Drainage ability
about 4,6 l/s/m (16600 l/h/m)
Pallet units
6 Rolls
Roll sizes in m
2,0 x 12,5
Temperature reistance
- 40°C til + 80°C (protect from UV-radiation)
Properties
resistant to chemicals resistant to roots, harmless to drinking water, resistant to mould and bakterial attacks, decay resistant
Toleration 4%
Color and size variations, etc. within the usual tolerances reserved. They note that local building codes. Our recommendations are not exempt from the obligation to verify independently the product. If in doubt, please take advantage of a professional consultation. All data and sketches by the manufacturer.
Technical changes reserved.
Accessories
guttabeta cover profile
for covering the upper
edge of the dimpled membrane, brown
Length 2000 mm
Width 80 mm
Height 15 mm
edge of the dimpled membrane, brown
Length 2000 mm
Width 80 mm
Height 15 mm
guttabeta PE assembly head
for attachment to the dimpled
membrane using steel nails
upper width 7mm,
lower width 16 mm,
borehole ø 3 mm
membrane using steel nails
upper width 7mm,
lower width 16 mm,
borehole ø 3 mm
guttabeta PE assembly dowels
for attachment to guttabeta vlies and vlies plus
Lenght 80 mm
Plate ø 53 mm
Lenght 80 mm
Plate ø 53 mm
Butyl tape, black
for attachment to the dimpled membrane in the overlapping area
Length 15 m
Width 15 mm
Length 15 m
Width 15 mm
