Polycarbonate corrugated sheets 1,4 mm, grooved clear
                                                    Polycarbonate corrugated sheets 1,4 mm, grooved clear

                                                            Polycarbonate corrugated sheets 1,4 mm, grooved anthracite
                                                    Polycarbonate corrugated sheets 1,4 mm, grooved anthracite

                                                            Trapeze sheets Polycarbonate 1,4 mm, grooved, clear
                                                    Trapeze sheets Polycarbonate 1,4 mm, grooved, clear

                                                            Polycarbonate corrugated sheets 2,6 mm, honeycomb clear
                                                    Polycarbonate corrugated sheets 2,6 mm, honeycomb clear

                                                            Polycarbonate corrugated sheets 2,6 mm, honeycomb bronze
                                                    Polycarbonate corrugated sheets 2,6 mm, honeycomb bronze

                                            Polycarbonate corrugated sheets 1,4 mm, grooved clear

                                            Polycarbonate corrugated sheets 1,4 mm, grooved anthracite

                                            Trapeze sheets Polycarbonate 1,4 mm, grooved, clear

                                            Polycarbonate corrugated sheets 2,6 mm, honeycomb clear

                                            Polycarbonate corrugated sheets 2,6 mm, honeycomb bronze

Polycarbonate corrugated sheets 1.4 mm | 2.6 mm

They endure: elephant plates from polycarbonate

Made of unbreakable, extremely resilient polycarbonate, our “elephant plates” live up to their name: The material’s quality guarantees roofing that can handle anything, even surviving hailstorms unscathed. If you are looking for a translucent roof that meets the highest standards, choose 1.4 or 2.6 mm polycarbonate corrugated sheets from Gutta!

Premium quality Polycarbonate (PC) Hail safe Sturdy and easy to handle High temperature resistance 10 year warranty

Hail-proof and unbreakable: polycarbonate corrugated sheets

The basis for our “elephant plates”, polycarbonate is a very tough and extremely shock-resistant plastic, manufactured especially to withstand demanding conditions. Our 1.4 and 2.6 mm polycarbonate (PC) boards are break-proof, hail-proof, and easy to handle, making them a clear choice for any project with demanding requirements for hail protection. You benefit from a superior quality roof; one that is sturdy, easy to use and also highly temperature-resistant. With numerous structures and tints for light panels, Gutta guarantees a pleasant lighting environment designed according to individual wishes.

Top quality translucent corrugated sheets

Polycarbonate translucent corrugated sheets from Gutta combine a long service life with excellent UV protection and high transparency in a visually attractive roofing option. Gutta sheets can be used for any number of projects: high-quality, sturdy canopies, light strips, roofing and walls, or in the design of pergolas and carports. One tip: Our PC sheets are particularly well suited to objects with strict demands on hail protection.

A 10 year warranty – rooted in practice

A special advantage: We grant a 10 year warranty for our polycarbonate sheets. For PC sheets with a thickness of 1.4 mm, the warranty is valid for 10 years for light translucence and hail resistance for hail up to grain size max. 40 mm, while for our 2.6 mm plates the warranty is unrestricted for 10 years on light transmittance and hail resistance.

“Kirsty,” the female elephant from the Neunkirchen Zoo demonstrated the durability of our polycarbonate corrugated sheets in an “endurance test”: The sheets were able to bear even her 4.2 t weight effortlessly – in the truest sense of the word:

 > Watch the video (Youtube)

Simple, solid, and high-quality: Laying polycarbonate profile plates

Working with our “elephant plates” is a simple task. The plates are attached with the appropriate calottes, along with stainless steel screws and spacers. With our step-by-step instructions, it is quite simple to lay corrugated sheets:

  • Plan for a roof pitch of 10° (minimum 7°).
  • First, build a substructure with wooden or metal slats of 40 x 60 mm.
  • The distances between the slats should be max. 80 cm for average snow and wind loads. The distance should be reduced accordingly for regions with higher loads!
  • Subsequently, cover the slats with silver masking tape.
  • The next step is to lay the polycarbonate corrugated sheets. Beginning at the eaves, lay the corrugated sheets towards the roof ridge, always working against the prevailing wind direction. Stagger the sheets in order to avoid corner cuts or quadruple overlaps. Begin the first row with a whole sheet, and the second with a half sheet.
  • Continue this process, alternating the sheet length each time.
  • Next, pre-drill the plates with a plastic hole cutter.
  • The cross coverage should be one wave, or two waves for a roof pitch below 10°.
  • The longitudinal overlap should be min. 15 cm, or 20 cm for a roof pitch below 10°.
  • Next, attach the sheet with screws or additional calottes at each third wave crest, and each second crest along the edges and overlap areas. Lay using spacers.
  • Plan on 8 to 10 fixtures per square meter.
Raw material Polycarbonate (PC)
Material-/wall thickness 1.4 + 2.6 mm
Specific density 1.20 g/cm³
Profile variants sinus 76/18, trapezoid 76/18
Colors clear, anthracite
Temperature resistance  – 40 to + 120 °C
Lengths 2,000 – 6,000 mm
Widths/usable widths 1.4 mm: Sinus: 900 mm/836 mm, Trapezoid: 950 mm/893 mm
2.6 mm: Sinus 1045 mm/980 mm
U-value 1.4 mm: U=5.70 W/m²K
2.6 mm: U=5.75 W/m²K
Specific heat capacity 1.30 J/ gK
Light transmission clear approx. 90 %, anthracite approx. 45 %, honeycomb clear approx. 88 %
Fire behaviour E according to DIN EN 13501-1
Elongation at yield 6-8 %
Linear thermal expansion 0.065 mm/m °C
Bending strength 93,00 Mpa
E-module 2300 Mpa
Charpy impact strength 50 KJ/m² > 50 KJ/m
Roof pitch min. 7°
Thermal conductivity 0.20 W /mK
Warranty factory warranty 10 years according to our warranty conditions
Note subject to technical changes. Data according to manufacturer’s specifications.

 

Hail-proof and unbreakable: polycarbonate corrugated sheets

The basis for our “elephant plates”, polycarbonate is a very tough and extremely shock-resistant plastic, manufactured especially to withstand demanding conditions. Our 1.4 and 2.6 mm polycarbonate (PC) boards are break-proof, hail-proof, and easy to handle, making them a clear choice for any project with demanding requirements for hail protection. You benefit from a superior quality roof; one that is sturdy, easy to use and also highly temperature-resistant. With numerous structures and tints for light panels, Gutta guarantees a pleasant lighting environment designed according to individual wishes.

Top quality translucent corrugated sheets

Polycarbonate translucent corrugated sheets from Gutta combine a long service life with excellent UV protection and high transparency in a visually attractive roofing option. Gutta sheets can be used for any number of projects: high-quality, sturdy canopies, light strips, roofing and walls, or in the design of pergolas and carports. One tip: Our PC sheets are particularly well suited to objects with strict demands on hail protection.

A 10 year warranty – rooted in practice

A special advantage: We grant a 10 year warranty for our polycarbonate sheets. For PC sheets with a thickness of 1.4 mm, the warranty is valid for 10 years for light translucence and hail resistance for hail up to grain size max. 40 mm, while for our 2.6 mm plates the warranty is unrestricted for 10 years on light transmittance and hail resistance.

“Kirsty,” the female elephant from the Neunkirchen Zoo demonstrated the durability of our polycarbonate corrugated sheets in an “endurance test”: The sheets were able to bear even her 4.2 t weight effortlessly – in the truest sense of the word:

 > Watch the video (Youtube)

Simple, solid, and high-quality: Laying polycarbonate profile plates

Working with our “elephant plates” is a simple task. The plates are attached with the appropriate calottes, along with stainless steel screws and spacers. With our step-by-step instructions, it is quite simple to lay corrugated sheets:

  • Plan for a roof pitch of 10° (minimum 7°).
  • First, build a substructure with wooden or metal slats of 40 x 60 mm.
  • The distances between the slats should be max. 80 cm for average snow and wind loads. The distance should be reduced accordingly for regions with higher loads!
  • Subsequently, cover the slats with silver masking tape.
  • The next step is to lay the polycarbonate corrugated sheets. Beginning at the eaves, lay the corrugated sheets towards the roof ridge, always working against the prevailing wind direction. Stagger the sheets in order to avoid corner cuts or quadruple overlaps. Begin the first row with a whole sheet, and the second with a half sheet.
  • Continue this process, alternating the sheet length each time.
  • Next, pre-drill the plates with a plastic hole cutter.
  • The cross coverage should be one wave, or two waves for a roof pitch below 10°.
  • The longitudinal overlap should be min. 15 cm, or 20 cm for a roof pitch below 10°.
  • Next, attach the sheet with screws or additional calottes at each third wave crest, and each second crest along the edges and overlap areas. Lay using spacers.
  • Plan on 8 to 10 fixtures per square meter.
Raw material Polycarbonate (PC)
Material-/wall thickness 1.4 + 2.6 mm
Specific density 1.20 g/cm³
Profile variants sinus 76/18, trapezoid 76/18
Colors clear, anthracite
Temperature resistance  – 40 to + 120 °C
Lengths 2,000 – 6,000 mm
Widths/usable widths 1.4 mm: Sinus: 900 mm/836 mm, Trapezoid: 950 mm/893 mm
2.6 mm: Sinus 1045 mm/980 mm
U-value 1.4 mm: U=5.70 W/m²K
2.6 mm: U=5.75 W/m²K
Specific heat capacity 1.30 J/ gK
Light transmission clear approx. 90 %, anthracite approx. 45 %, honeycomb clear approx. 88 %
Fire behaviour E according to DIN EN 13501-1
Elongation at yield 6-8 %
Linear thermal expansion 0.065 mm/m °C
Bending strength 93,00 Mpa
E-module 2300 Mpa
Charpy impact strength 50 KJ/m² > 50 KJ/m
Roof pitch min. 7°
Thermal conductivity 0.20 W /mK
Warranty factory warranty 10 years according to our warranty conditions
Note subject to technical changes. Data according to manufacturer’s specifications.

 

Cookie Settings

Listed here are all the cookies used for our marketing purposes.
Google Analytics (cn_AnalyticsActive)
Facebook (cn_FacebookActive)