25 mm polycarbonate wall sheets, clear
                                                    25 mm polycarbonate wall sheets, clear

                                                            25 mm polycarbonate wall sheets, opal, with heat protection
                                                    25 mm polycarbonate wall sheets, opal, with heat protection

                                            25 mm polycarbonate wall sheets, clear

                                            25 mm polycarbonate wall sheets, opal, with heat protection

25 mm polycarbonate multiwall sheets

Polycarbonate roofing with high thermal insulation!

With our polycarbonate (PC) multi-wall sheets, you opt for long-term, resilient, and sustainable roofing. Our 10 and 16 mm versions are suitable for many common roof coverings, transparent wind protection elements, or garden structures. Are you looking for the best in quality and thermal insulation? If so, opt for our 25 mm polycarbonate multi-wall sheets!

Polycarbonate (PC) Maximum shock and hail resistance Fast and easy installation High UV and weather resistance Very good insulation properties Superior durability thanks to high quality materials

Polycarbonate multi-wall sheets; for roofs that meet the highest standards

The glazing on Gutta’s strongest polycarbonate sheets is weather-resistant, shock-resistant and, thanks to a special surface finish, offers almost complete protection against UV rays. This allows you to design roofing that offers lasting protection against wind and weather while retaining a visually arresting style. Our 25 mm polycarbonate wall sheets are ideal for closed structures, permanent conservatories, or for roofing a swimming pool.

Well insulated with thermo multi-wall sheet

Do you have strict requirements for the thermal insulation of your roofing? If so, our 25 mm thermo multi-wall panel made of sturdy polycarbonate have the answer. These panels will stay sealed, and thanks to their special properties, also keep you warm. At a thickness of 25 mm, the panels have a very low U-value of 1.5 W / m2K. At the same time, the “geometrical design” of the plates results in significantly better static values ​​than comparable 16-millimetre plates.

Installation video (Youtube)

> Aluminium thermoprofilesystem for 25 mm plates

Technical data 25 mm:

Raw materials Polycarbonate (PC)
Sheet thickness 25.00 mm
Specific gravity 1.20 g/cm²
Colors clear, white-opal
Temperature resistance  – 40 to + 120 °C
Length 2,000 – 6,000 mm
Width 980 or 1,200 mm
Weight 3.00 kg/m²
U-value 1.45 W/m
Light transmission clear approx. 58%/white-opal approx. 49%
Fire behaviour B2 (according to DIN 4102)
Hollow chamber width ~ 20.00 mm
Linear coefficient of thermal expansion 0.065 mm/m °C
Minimum permissible cold bending radius 4,375 mm, the bend must be in the direction of the webs, not across (risk of kinking!)
Sound insulation index 23.00 dB
Tensile strength 60.00 N/mm²
Elongation at break 80% (Condition: 10mm/min)
Charpy impact strength 40 – 400 J (ISO 6603/1)
Thermal expansion/contraction 3.00 mm/m
Roof pitch min. 7°
UV protection on both sides
Warranty factory warranty 10 years according to our warranty conditions
Note subject to technical changes. Data according to manufacturer’s specifications.

 

Technical data  25 mm with heat protection:

Raw materials Polycarbonate (PC)
Sheet thickness 25.00 mm
Specific gravity 1.20 g/cm²
Colors white-Opal
Temperature resistance  40 to +120 °C
Length 2,000 – 6,000 mm
Width 980 mm
Weight 3.00 kg/m²
U-value 1.45 W/m
Light transmission approx. 48%
Fire behaviour B2 (according to DIN 4102)
Hollow chamber width ~ 20.00 mm
Linear coefficient of thermal expansion 0.065 mm/m °C
Minimum permissible cold bending radius 4,375 mm, the bend must be in the direction of the webs, not across (risk of kinking!)
Sound insulation index 23.00 dB
Tensile strength 60.00 N/mm²
Elongation at break 80% (Condition: 10mm/min)
Charpy impact strength 40 – 400 J (ISO 6603/1)
Thermal expansion/contraction 3.00 mm/m
Roof pitch min. 7°
UV protection on both sides
Warranty factory warranty 10 years according to our warranty conditions
Note subject to technical changes. Data according to manufacturer’s specifications.

Polycarbonate multi-wall sheets; for roofs that meet the highest standards

The glazing on Gutta’s strongest polycarbonate sheets is weather-resistant, shock-resistant and, thanks to a special surface finish, offers almost complete protection against UV rays. This allows you to design roofing that offers lasting protection against wind and weather while retaining a visually arresting style. Our 25 mm polycarbonate wall sheets are ideal for closed structures, permanent conservatories, or for roofing a swimming pool.

Well insulated with thermo multi-wall sheet

Do you have strict requirements for the thermal insulation of your roofing? If so, our 25 mm thermo multi-wall panel made of sturdy polycarbonate have the answer. These panels will stay sealed, and thanks to their special properties, also keep you warm. At a thickness of 25 mm, the panels have a very low U-value of 1.5 W / m2K. At the same time, the “geometrical design” of the plates results in significantly better static values ​​than comparable 16-millimetre plates.

Installation video (Youtube)

> Aluminium thermoprofilesystem for 25 mm plates

Technical data 25 mm:

Raw materials Polycarbonate (PC)
Sheet thickness 25.00 mm
Specific gravity 1.20 g/cm²
Colors clear, white-opal
Temperature resistance  – 40 to + 120 °C
Length 2,000 – 6,000 mm
Width 980 or 1,200 mm
Weight 3.00 kg/m²
U-value 1.45 W/m
Light transmission clear approx. 58%/white-opal approx. 49%
Fire behaviour B2 (according to DIN 4102)
Hollow chamber width ~ 20.00 mm
Linear coefficient of thermal expansion 0.065 mm/m °C
Minimum permissible cold bending radius 4,375 mm, the bend must be in the direction of the webs, not across (risk of kinking!)
Sound insulation index 23.00 dB
Tensile strength 60.00 N/mm²
Elongation at break 80% (Condition: 10mm/min)
Charpy impact strength 40 – 400 J (ISO 6603/1)
Thermal expansion/contraction 3.00 mm/m
Roof pitch min. 7°
UV protection on both sides
Warranty factory warranty 10 years according to our warranty conditions
Note subject to technical changes. Data according to manufacturer’s specifications.

 

Technical data  25 mm with heat protection:

Raw materials Polycarbonate (PC)
Sheet thickness 25.00 mm
Specific gravity 1.20 g/cm²
Colors white-Opal
Temperature resistance  40 to +120 °C
Length 2,000 – 6,000 mm
Width 980 mm
Weight 3.00 kg/m²
U-value 1.45 W/m
Light transmission approx. 48%
Fire behaviour B2 (according to DIN 4102)
Hollow chamber width ~ 20.00 mm
Linear coefficient of thermal expansion 0.065 mm/m °C
Minimum permissible cold bending radius 4,375 mm, the bend must be in the direction of the webs, not across (risk of kinking!)
Sound insulation index 23.00 dB
Tensile strength 60.00 N/mm²
Elongation at break 80% (Condition: 10mm/min)
Charpy impact strength 40 – 400 J (ISO 6603/1)
Thermal expansion/contraction 3.00 mm/m
Roof pitch min. 7°
UV protection on both sides
Warranty factory warranty 10 years according to our warranty conditions
Note subject to technical changes. Data according to manufacturer’s specifications.

Cookie Settings

Listed here are all the cookies used for our marketing purposes.
Google Analytics (cn_AnalyticsActive)
Facebook (cn_FacebookActive)