guttagliss dual twinwall sheets

The insulating made of polycarbonate in long-life quality.

guttagliss dual twinwall sheets| Click to enlarge
guttagliss dual twinwall sheets| Click to enlarge
guttagliss dual twinwall sheets| Click to enlarge
guttagliss dual twinwall sheets| Click to enlarge
guttagliss dual

Properties

  • Premium quality * * * * *

  • Polycarbonat (PC)

  • Highest impact and hailstorm resistance

  • Quick and easy assembly

  • Long lasting due to high quality materials

  • High UV and weather resistance

  • Largest variety of sheets for many applications

  • Very good insulating characteristics

  • Cold-bending

  • UV impermeable to 385 Nanometer


Your options

  • Terrace and balcony roofing

  • Winter gardens

  • Pergolas

  • Carports

  • Roofing and wall cladding

  • ... and your idea


Get your patio, carport, roofs and panels in top shape and set visual and aesthetic highlights with guttagliss dual twinwall sheets - and decide in favour of an extremely robust and long-lived solution which will give you many years of pleasure. You'll be thrilled with this high-grade polycarbonate material: it's easy and quick to use with the guttagliss sheets.

The glazing is weather resistant, impact resistant and, thanks to a special surface finish, almost perfectly protected from UV radiation. The guttagliss dual twinwall sheets provide long-lived and durable solutions – with a high thermal insulation rating as an additional extra. Enjoy a free choice in your creative designs: choose not only from different sheet thicknesses, but also find the matching solution for special purposes.

guttagliss dual easy clean

Magic cleanliness: guttagliss dual easy clean sheets feature a self-cleaning coating on the top face of the sheet. The effect: the surface tension of the water is reduced and the individual droplets coalesce into a water film. Dirt and particles are collected and will simply flow off.

guttagliss dual thermo

This sheet keeps tight – and also warm thanks to its special properties. With a thickness of 25 mm, these sheets feature an extremely low solar heat gain coefficient of 1.5 W/m2K – a record for genuine thermal properties. With their "geometric structure", these sheets also offer substantially better static values than similar 16 millimetre sheets.

Versions(click to enlarge)
dual 4,5 mm clear
For glazing and hobby

dual 6 mm clear
For greenhouses, hotbeds
or glazing
dual 10 mm clear
For smaller roofs and glazing

dual 10 mm bronce
For smaller roofs and glazing
with a slight brown tint

dual 16 mm clear
Robust and proven quality
for roofing and wall cladding

dual 16 mm bronce
Robust and proven quality
for roofing and wall cladding
with a slight brown tint
dual 16 mm easy clean
With built-in self-cleaning
on the plate surface
dual X 16 mm
With improved stability

dual 16 mm opal white
Provides additional protection
against direct sunlight
dual  25 mm thermo
With excellent thermal
insulation
dual 25 mm sun
With heat protection and
excellent thermal insulation

 

 

 guttagliss pvc clamp cover profile system | Alu/pvc clamp cover profile for 10 or 16 mm sheets

 
Center profile
for 10 mm or 
16 mm plate thikness,
white/silver with two
sealing lips
Width: 61 mm
Height: 28/35 mm
Lenghts: 2000-6000 mm

Edge profile
for 10 mm or 
16 mm plate thikness,
white/silver with
sealing lip
Width: 61 mm
Height: 28/35 mm
Lenghts: 2000-6000 mm

End angle and
holding angle 
for 10 mm plates,
Aluminium white
powder coated,
semicircular,
62 x 56 x 35 mm


End angle and
holding angle 
for 16 mm plates,
Aluminium white
powder coated,
semicircular,
62 x 56 x 41 mm


Alu-U-profile
for 10 mm plates,
white, with drip edge,
for front and back
plate closure
Lenght: 1050mm



Alu-U-profile
for 16 mm plates,
white, with drip edge,
for front and back
plate closure
Lenghts: 980 mm
or 1200 mm


Stainless steel screws
for wood
for fastening the lower
profiles on timber
structure
4,5 x 35 mm



Stainless steel screws
for metal
for fastening the lower
profiles on timber
structure and for
fastening the
end angle and holding
angle, 4,2 x 16 mm

Wall junction profile
Aluminium mill finish,
with sealing lips, for
flexible wall connections
from ca. 8-18° roof pitch
Width: 115 mm
Lengths: 2050-3100 mm

Joint for wall junction
profile
silver/grey
25 x 115 mm




Side panels for wall
junction profile
Set with 2 pieces
and 4 screws




Roof ridge profile
Aluminium, 
with two sealing lips
Side lenght: 80 mm
Width: 160 mm 
Height: 40 mm
Lenghts: 2000-6000 mm

Edging tape
self-adhesive, silver
with membrans
Widths: 43 mm
or 37 mm
Lenght: 15 m
Adhesive tape silver
reflective,
to mask the surfaces
of the structure
Width: 60 mm
Lenght: 50 m
Special silicone
310 ml cartridge
for sealing and adhesion,
plastic compatible








guttagliss aluminium srcew profile system | High end aluminium profile for 16 mm sheets

Center profile
for 16 mm plate thikness,
aluminium with four
sealing lips
Width: 61 mm
Height: 33 mm
Lenghts: 2000-6000 mm


Edge profile
for 16 mm plate thikness,
aluminium with three
sealing lips
Width: 61 mm
Height: 33 mm
Lenghts: 2000-6000 mm


End angle and
holding angle 
bored and grooved,
can be adapted
to the final height
36 x 50 x 60 mm



Alu-U-profile
for 16 mm plates,
Aluminium,
with drip edge,
for front and back
plate closure
Lenghts: 980 mm
or 1200 mm

Alu-U-profile
for 16 mm plates,
Aluminium white,
with drip edge,
for front and back
plate closure
Lenghts: 980 mm
or 1200 mm

Stainless steel screws
for wood
for fastening the lower
profiles on timber
structure
4,5 x 35 mm



Stainless steel screws
for metal
for fastening the lower
profiles on metal
structure and for
fastening the
end angle and holding
angle, 4,2 x 16 mm

Stainless steel screws
for metal
with neoprene gasket,
for screwing the 
Profile tops with
the lower parts
6,3 x 32 mm


Decorative clamp cap
Aluminium, 
silver anodized,
for all profiles with
aluminium top profile
Width: 63 mm
Height: 16,4 mm
Lenghts: 2000-6000 mm

Decorative clamp cap
Aluminium, 
white powder-coated,
for all profiles with
aluminium top profile
Width: 63 mm
Height: 16,4 mm
Lenghts: 2000-6000 mm

Wall junction profile
Aluminium mill finish,
with sealing lips, for
flexible wall connections
from ca. 8-18° roof pitch
Width: 115 mm
Lengths: 2050-3100 mm


Joint for wall junction
profile
silver/grey
25 x 115 mm





Side panels for wall
junction profile
Set with 2 pieces
and 4 screws




Roof ridge profile
Aluminium, 
with two sealing lips
Side lenght: 80 mm
Width: 160 mm 
Height: 40 mm
Lenghts: 2000-6000 mm

Edging tape
self-adhesive, silver
with membrans
Widths: 43 mm
Lenght: 15 m



Adhesive tape silver
reflective,
to mask the surfaces
of the structure
Width: 60 mm
Lenght: 50 m


Special silicone
310 ml cartridge
for sealing and adhesion,
plastic compatible



guttagliss aluminium cap profile system
| Simple aluminium profile for 16 mm sheets

Center profile
for 16 mm plate thikness,
aluminium with two
sealing lips and
self-adhesive
rubber underlay
Width: 61 mm
Height: 28,5 mm
Lenghts: 2000-6000 mm

Edge profile
for 16 mm plate thikness,
aluminium with
sealing lip and
self-adhesive
rubber underlay
Width: 61 mm
Height: 28,5 mm
Lenghts: 2000-6000 mm

rubber underlay
lightgrey, 
self-adhesive
Width: 60 mm
Lenghts: 2000-6000 mm





End angle and
holding angle
for 16 mm plates,
Aluminium mill finish,
36 x 50 x 60 mm





Alu-U-profile
for 16 mm plates,
Aluminium mill finish,
with drip edge,
for front and back
plate closure
Lenghts: 980 mm
or 1200 mm
Stainless steel screws
for wood
with neoprene gasket,
for fastening the cap
profiles on timber
structure
6,5 x 64 mm


Stainless steel screws
for metal
with neoprene gasket,
for fastening the cap
profiles on metal
structure
6,3 x 50 mm


Wall junction profile
Aluminium mill finish,
with sealing lips, for
flexible wall connections
from ca. 8-18° roof pitch
Width: 115 mm
Lengths: 2050-3100 mm


Joint for wall junction
profile
silver/grey
25 x 115 mm




Side panels for wall
junction profile
Set with 2 pieces
and 4 screws




Roof ridge profile
Aluminium, 
with two sealing lips
Side lenght: 80 mm
Width: 160 mm 
Height: 40 mm
Lenghts: 2000-6000 mm

Edging tape
self-adhesive, silver
with membrans
Width: 43 mm
Lenght: 15 m



Adhesive tape silver
reflective,
to mask the surfaces
of the structure
Width: 60 mm
Lenght: 50 m
Special silicone
310 ml cartridge
for sealing and adhesion,
plastic compatible



guttagliss aluminium Thermoplus 
profile system | Thermally separated aluminium profile for 25 mm sheets

Center profile
for 25 mm plate thikness,
aluminium with four
sealing lips and
spacer web 
Width: 61 mm
Height: 42 mm
Lenghts: 2000-6000 mm

Edge profile
for 25 mm plate thikness,
aluminium with two
sealing lips and
two spacer webs
Width: 61 mm
Height: 42 mm
Lenghts: 2000-6000 mm

End angle and
holding angle 
Aluminium mill finish,
bored and grooved,
can be adapted
to the final height
36 x 50 x 60 mm


Alu-U-profile
for 25 mm plates,
Aluminium,
with drip edge,
for front and back
plate closure
Lenghts: 980 mm
or 1200 mm

Stainless steel screws
for wood
for fastening the lower
profiles on timber
structure
4,5 x 35 mm



Stainless steel screws
for metal
for fastening the lower
profiles on metal
structure and for
fastening the
end angle and holding
angle, 4,2 x 16 mm

Stainless steel screws
for metal
with neoprene gasket,
for screwing the 
Profile tops with
the spacer webs
6,3 x 38 mm


Decorative clamp cap
Aluminium, 
silver anodized,
for all profiles with
aluminium top profile
Width: 63 mm
Height: 16,4 mm
Lenghts: 2000-6000 mm

Decorative clamp cap
Aluminium, 
white powder-coated,
for all profiles with
aluminium top profile
Width: 63 mm
Height: 16,4 mm
Lenghts: 2000-6000 mm
Wall junction profile
Aluminium mill finish,
with sealing lips, for
flexible wall connections
from ca. 8-18° roof pitch
Width: 115 mm
Lengths: 2050-3100 mm


Joint for wall junction
profile
silver/grey
25 x 115 mm





Side panels for wall
junction profile
Set with 2 pieces
and 4 screws





Roof ridge profile
Aluminium, 
with two sealing lips
Side lenght: 80 mm
Width: 160 mm 
Height: 40 mm
Lenghts: 2000-6000 mm
Edging tape
self-adhesive, silver
with membrans
Width: 50 mm
Lenght: 15 m


Adhesive tape silver
reflective,
to mask the surfaces
of the structure
Width: 60 mm
Lenght: 50 m

Special silicone
310 ml cartridge
for sealing and adhesion,
plastic compatible




guttagliss 
PC fixing profiles

Simple plastic profiles for plate caps and connections in the wall region

U clamp profile
transparent,
for sheet ends
Thickness: 6, 10, 16 mm
Lengths: 2000-6000 mm
H clamp profile
transparent,
for sheet connections
Thickness: 6, 10, 16 mm
Lengths: 2000-6000 mm
Corner clamp profile
transparent,
for sheet connections
Thickness: 6, 10, 16 mm
Lengths: 2000-6000 mm
Special silicone
310 ml cartridge
for sealing and adhesion,
plastic compatible

6 mm dual 

Lengths in mm2000, 2500, 3000                                           
Widths in mm1050 
Colorsclear
Weight g/m²1300
U-value W/m² °C3,5
Transparency (approx.)clear 82%
Fire class DIN 4102B1
Cold-bending radius mm/max.1050
Hollow chamber widths in mm~ 6,35
Temperature stability-40 up to +120°C
Stretch coefficient (mm/m°C)*0,065
UV protectionon both side

6 mm plates should be used only for small objects such as small greenhouses, shelters, doorways, etc.!

10 mm dual 

Lengths in mm2000, 2500, 3000, 3500, 4000, 5000, 6000
Widths in mm1050
2100 (only clear; on request)
Colorsclear, bronce
Weight g/m²1700
U-value W/m² °C3,0
Transparency (approx.)clear 80%, bronce 35%
Fire class DIN 4102B1
Cold-bending radius mm/max.1750
Hollow chamber widths in mm~ 10,7
Temperature stability -40 up to  +120°C
Stretch coefficient (mm/m°C)*0,065
UV protectionon both side


16 mm dual 

Lengths in mm2000, 2500, 3000, 3500, 4000, 5000, 6000
Widths in mm980, 1200
Colorsclear, bronce, white-opal
Weight g/m²2700
U-value W/m² °C2,4
Transparency (approx.)clear 76%, bronce 35%, white-opal 48%
Fire class DIN 4102B1
Cold-bending radius mm/max.2800
Hollow chamber widths in mm~ 20
Temperature stability -40 up to +120°C
Stretch coefficient (mm/m°C)*0,065
UV protectionon both side


25 mm dual thermo

Lengths in mm2000, 2500, 3000, 3500, 4000, 5000, 6000
Widths in mm980, 1200
Colorsclear, white-opal
Weight g/m²3500
U-value W/m² °C1,5
Transparency (approx.)clear 58%, white-opal 49%
Fire class DIN 4102B2
Cold-bending radius mm/max.4375
Hollow chamber widths in mm~ 20
Temperature stability -40 up to +120°C
Stretch coefficient (mm/m°C)*0,065
UV protectionon both side
opal only one side


25 mm dual sun

Lengths in mm2000, 2500, 3000, 3500, 4000, 5000, 6000
Widths in mm980, 1200
Coloropal-white
Weight g/m²3500
U-value W/m² °C1,5
Transparency (approx.)opal-white 40%
Fire class DIN 4102B2
Cold-bending radius mm/max.4375
Hollow chamber widths in mm~ 20
Temperature stability -40 up to +120°C
Stretch coefficient (mm/m°C)*0,065
UV protectionone side

*Formula for calculation of elongation/shrinkage:

Coefficient of linear extension x sheet length in m x temperature difference in °C = Thermal expansion/shrinkage in mm



 

 

Our guttagliss dual twinwall sheets are warranted for 10 years after the selling date against breakage as a result of weather or hailstone exposure, and against excessive loss of translucency.

Detailed warranty terms on each product, especially the preconditions and limitations, are found under Downloads.

If requested, the warranty terms will be sent in hardcopy.

© 2018 Gutta Group